O r e g o n ' s   I n t e r n e t   S e r v i c e   P r o v i d e r
Hevanet
Current PDX Conditions:

©Copyright
Hevanet Communications
All Rights Reserved



WINDOWS NT4


Open My Computer, then Dialup Networking. Click on New.

If a Wizard starts, check the box "I know all about phonebook entries and would rather edit the properties directly".

On the Basic tab, use Hevanet for the Entry Name. For the phone number, use the following:

  • 503-972-4330  V.90 56K modems
On the Server tab, server type is PPP,  Windows NT, etc. TCP/IP is the only Network Protocol required. Un-check "Enable PPP LCP extensions".

Click "TCP/IP Settings". Change to "Specify name server addresses"

  • Primary DNS:  198.5.254.1
  • Secondary DNS: 198.5.254.5
On the "Script" tab,  check "None".

Check  the "Security" tab and be sure "Accept any authentication including clear text" is selected. The "X25" settings should be the default.

CONNECTING TO HEVANET

To start your Internet session double click on the Internet Explorer Icon. You can also dial directly from Dialup Networking. You should see a Connect to Hevanet dialogue. Make sure your Hevanet login name and password are in the username and password fields. Leave the Domain field blank. Click on OK to start your modem dialing.

You will see a window verifying your user name and password. Once this window disappears, you are ready to run your favorite browser, mail, news programs etc. If you get any error messages, see the Troubleshooting section.