Open your web browser. Click stop,
then type the following in the address box:
You should get an Actiontec menu screen.
Click on Manual Setup.
Click on Advanced Setup at the top.
Click on the WAN IP Address link.
(middle of page or on the left)
Click the Yes button to proceed.
Configure the following in the setup screen:
1. RFC 1483 via Static IP
Encapsulation: RFC 1483 Bridged
2. PPP username and password are not applicable.
Leave these blank.
3. Select the IP Type
IP: [Call or Email Hevanet
Subnet Mask: 255.255.255.0
Default Gateway Address: [the Gateway is your IP address
except with .1 as the last number]
4. Select the DNS Type.
Static DNS Addresses
Primary DNS: 18.104.22.168
Secondary DNS: 22.214.171.124
Scroll to the bottom and click, "Apply".
The next page will be VPI VCI settings. For Qwest connections,
it is 0 and 32.
For Verizon connections, it is 0 and 35
Click "Apply" again.
The modem will reset, and once the power,
DSL and Internet lights are solid green, you
should be able to access the Internet.