O r e g o n ' s   I n t e r n e t   S e r v i c e   P r o v i d e r
Hevanet
Current PDX Conditions:

©Copyright
Hevanet Communications
All Rights Reserved



2Wire 2700HG-D Wireless Setup


The 2Wire 2700HG-D DSL Modem/Router includes a built-in wireless base station. To set up your wireless network, follow the steps below.
  1. The 2Wire Wireless broadcast is actually ON by default. A default 64 bit WEP encryption key is already pre-programed into the modem. To find the key, look on the modem's label for KEY
  2. Write down the KEY and go to your wireless computer.
  3. At your wireless computer, open the wireless card configuration utility. In Windows XP, there should be a wireless icon by the clock that will tell you when in range of a access point. Right-click on the icon and select "View available wireless networks". Find the 2Wire network name and click the Connect button. Enter all the characters without spaces.
    If you use a Macintosh with an Airport card, you must enter a "$" [Dollar sign] as the first character of your WEP key.

Happy Wireless Computing!